Product Details:
Output Current | 4 Amp |
Input Voltage | 230 V AC |
Output Voltage | 24 VDC |
Power Supply | 230 V AC |
Output | 24 V DC For Power Brake & Clutch |
Frequency | 50 HZ |
Country of Origin | Made in India |
Product Details:
Usage/Application | Industrial |
Control Type | Low Limit, High Limit |
Current | 4 A |
Voltage | 220 V |
Pole Type | Single Pole |
Frequency | 50 Hz |
Material | Mild Steel |
Phase | Single |
Throw Type | Single Throw |
Capacity | 400 Kg |
Customers can avail a wide range of Tension Controller from us. These controllers are made in accordance with the set industry norms using the sturdy raw material. Our tension controllers are widely demanded in the market for various weighing and measurement purposes. The features like strain gauge based sensors, easy tension calibration and automatic as well as manual tension control make these products a preferred choice of many clients. The entire range is tested completely before final delivery. Our tension controllers are reasonably priced.
Features:
Product Details:
Usage/Application | Industrial |
Brand | Altec |
Power Supply | 100-240V AC, 50/60Hz |
Resolution | +/-0.2% FS +/-1 digit |
Ambient Temp | 0-50 Degree C |
Humidity | Less than 85% |
Standard output signal | 0-10V, 4-20 mA, 0-20 mA, which can be directed to a brake or a DC drive |
Tension Signal Input | 0-50 mV |
Output Analog | 4-20mA, 0-20mA, 0-10V, 1-3 Phase |
Control Algorithm | PID (Proportional, Integral, Derivative) |
Sample Rage | 100 ms |
Output | Relay, No, Max. 250 V AC, 3A |
Alarm | Zero tension alarm |
Dimensions | 96x96x100 mm (WxHxD) |
The TC950 Tension Controller provide precision tension control for web or strand applications. TC950 can be used to form a closed-loop tension control system. In the sysem, dual tension signal was sent to the controller, the controller compares the target tension with the actual tension and calculates the output with a build-in PID algorithm, then output a compensating signal to a tensioning device such as a powder brake, clutch or a DC drive to get the accurate control of tension.
Features:
Additional Information:
Product Details:
Usage/Application | Industrial |
Brand | Altec |
Material | ABS |
Model Name/Number | TC-818 |
Power Supply | 92-240V AC, 50/60Hz |
Tension alarm | Relay, Normally open, 3A/250V AC |
Main Outputs | Dual 24V/4A, drive magnetic power brake/clutch |
Ambient Temp | 0-50 Degree C |
Resolution | 128x96 graphical LCD |
Mesurement | +/-0.2% FS +/-1 digit |
Sampling Rate | 100 ms |
Control Algorithm | PI (Proportional integral) |
Auxiliary Output | Dual 0-20mA, drive inverter or electric pneumatic converter |
Humidity | Less than 85% |
Dimensions | 246x154x156.5 mm (WxHxD) |
Displays | Upper, 4 digits, High brightness red LED |
The TC818 Tension Controller, with a 128x96 pixel graphical lcd display, provides precision control of winding, unwinding zones in both web and strand processing applications. The dual 0-24V/4A outputs can drive the magnetic powder clutch/brake directly. The LCD and indicators make the user can opearate the controller easily without long time learning. Menu security levels can protect the setting parameters.
Special Features:
Tension Input:
Product Details:
Usage/Application | Industrial |
Brand | Tensiomatic |
Phase | Single Phase |
Resolution | +- 0.2% FS +- 1 digit |
Tension Signal Input | 0- 50 m V |
Humidity | Less Then Equal to 85% |
Power Supply | 100-260 V AC |
Dimensions | 96 x 96 x 100 mm |
Ambient Temperature | 0-50 Degree C |
Frequency | 50/60 Hz |
The Web Tension Controller is an application specific controller designed to provide you with precise Control over winding and unwinding tension control applications for web and strand.
Features: